Very welcome to JHEMCU

Products >> VTX >> 

  • JHEMCU GHVTX5840 5.8G40CH 25/200/400/800/1000mW with OSD
  • JHEMCU GHVTX5840 5.8G40CH 25/200/400/800/1000mW with OSD
  • JHEMCU GHVTX5840 5.8G40CH 25/200/400/800/1000mW with OSD
  • JHEMCU GHVTX5840 5.8G40CH 25/200/400/800/1000mW with OSD
JHEMCU GHVTX5840 5.8G40CH 25/200/400/800/1000mW with OSD JHEMCU GHVTX5840 5.8G40CH 25/200/400/800/1000mW with OSD JHEMCU GHVTX5840 5.8G40CH 25/200/400/800/1000mW with OSD JHEMCU GHVTX5840 5.8G40CH 25/200/400/800/1000mW with OSD

JHEMCU GHVTX5840 5.8G40CH 25/200/400/800/1000mW with OSD

 The GHVTX-5840 series VTX is a 5.8G ISM band analog image transmission, which has the characteristics of stable output power, long transmission distance, strong power filter, and can ensure that the image has no snowflakes and no horizontal stripes under the maximum throttle. Use stackable installation, design M3 screw holes of 25.5*25.5MM. The image transmission supports IRC OSD parameter adjustment, while retaining the button function, 5 power levels switchable
 
 
Features:
 
         1. Fast 5-speed power switch, two independent red indicator lights, indicating the current transmit power 25/200/400/800/1000MW.
 
         2. The frequency point uses 6 LEDs to display 40 channel values.
 
         3. Support OSD parameter adjustment.
 
         4. Powerful power chip, input up to 27V, output 5V/2A low ripple, small interference.
 
         5. The image transmission will not be burned if the antenna is installed and powered on.
 
         6. Light weight: 3.6g (not including antenna and plug cable).
 
 
 
Performance:
 
         1. Input voltage: DC 7V-27V (2-6S)
 
         3. Output voltage: DC 5V 2A
 
         4. Power switching: five gears 25MW, 200MW, 400MW, 800MW, 1000MW
 
         5. Signal channels: 40
 
         6. Frequency point switching: manual button /IRC OSD (simultaneous support)
 
         7. Antenna interface: IPEX
 
         8. Overall dimensions: 40MM*40MM Hole distance: 25.5*25.5MM, M3
 
 
Overall introduction:
 
 
+5V GND VIDEO
 
Camera power supply (5V)
 
 
VIN GND
 
Input power supply (7-27V)
 
 
RXD
 
Flight control serial transmission IRCOSD
 
 
LED indication: L1-L6 channel, P1-P2 power 
 
Frequency adjustment: 
 
1. Manual adjustment
 
FR button to switch channels, 6 LEDs indicate channels. Default channel 5865 
 
Power switching
 
POW button Power adjustment.Default is 25MW. 
 
Packing List:
 
GHVTX-5840 image transmission transmitter module * 1
 
6P*1.0MM plug cable * 1
 
IPEX antenna * 1
 
Bandage * 2
 

Products Category

Contact Us