Very welcome to JHEMCU

Products >> VTX >> 

  • JHEMCU VYX5840 5.8G 40CH 25/200/400/800/1000mW VTX W/ OSD
  • JHEMCU VYX5840 5.8G 40CH 25/200/400/800/1000mW VTX W/ OSD
  • JHEMCU VYX5840 5.8G 40CH 25/200/400/800/1000mW VTX W/ OSD
  • JHEMCU VYX5840 5.8G 40CH 25/200/400/800/1000mW VTX W/ OSD
JHEMCU VYX5840 5.8G 40CH 25/200/400/800/1000mW VTX W/ OSD JHEMCU VYX5840 5.8G 40CH 25/200/400/800/1000mW VTX W/ OSD JHEMCU VYX5840 5.8G 40CH 25/200/400/800/1000mW VTX W/ OSD JHEMCU VYX5840 5.8G 40CH 25/200/400/800/1000mW VTX W/ OSD

JHEMCU VYX5840 5.8G 40CH 25/200/400/800/1000mW VTX W/ OSD

 The VTX5840 series vtx is a 5.8G ISM frequency band analog image transmission, which has the characteristics of stable output power, long transmission distance, strong power filter, and can ensure that the image has no snowflakes and no horizontal stripes under the maximum throttle. Use stackable installation, design 30.5*30.5MM M3 screw holes, with heat sink on the back. The image transmission supports IRC OSD parameter adjustment, while retaining the button function, 5 power levels switchable
 
 
Features:
 
         1. Fast 5-speed power switch, two independent red indicator lights, indicating the current transmit power 25/200/400/800/1000MW.
 
         2. The frequency point uses 6 LEDs to display 40 channel values.
 
         3. Support OSD parameter adjustment.
 
         4. The antenna uses MMCX to SMA extension cable, which reduces the space occupied by the PCB board.
 
         5. Powerful power chip, input up to 27V, output 5V/2A low ripple, small interference.
 
         6. The image transmission will not be burned if the antenna is installed and powered on.
 
         7. Light weight: 4.1g (not including antenna and plug cable).
 
 
Performance:
 
         1. Input voltage: DC 7V-27V (2-6S)
 
         3. Output voltage: DC 5V 2A
 
         4. Power switching: five gears 25MW, 200MW, 400MW, 800MW, 1000MW
 
         5. Signal channels: 40
 
         6. Frequency point switching: manual button /IRC OSD (simultaneous support)
 
         7. Antenna interface: MMCX (distribution to SMA extension cable)
 
         8. Overall dimension: 36MM*36MM Hole distance: 30.5*30.5MM, M3
 
 
Overall introduction:
 
 
+5V GND VIDEO
 
Camera power supply (5V)
 
 
VIN GND
 
Input power supply (7-27V)
 
 
RXD
 
Flight control serial transmission IRCOSD
 
 
LED indication: L1-L6 channel, P1-P2 power
 
 
Frequency adjustment:
 
1. Manual adjustment
 
FR button to switch channels, 6 LEDs indicate channels. Default channel 5865
 
 
Power switching:
 
         POW button Power adjustment. The default is 25MW.
 
Packing List:
                  VTX5840-1W image transmission module * 1
 
                  6P*1.0MM plug cable * 1
 
                  MMCX-SMA antenna adapter cable * 1
 
                  MMCX antenna * 1
 

Products Category

Contact Us